CNC EVA Glass Laminating Machine
Technical Parameter of EVA Vacuum Glass Laminating Machine
Maximum size of laminating glass: Customize as customers’ need
Layer number of silicone beds: 2 silicone beds
CE Certification
Voltage: 380v-440v
Frequency:50HZ–60HZ
Current:60A
Total wattage≤40KW
Heating wattage:36KW
Winding wattage:2.25KW
Highly efficient and power-saving:it consumes 40degress power to make 5 layers of glass in one furnace every 2-3hours.
Summary of EVA Vacuum Glass Laminating Machine
EVA Vacuum Glass Laminating Machine is a equipment specially designed for manufacturing laminated safety and decoration glass with Ethylene-vinyl acetate EVA Interlayer Film. The EVA Vacuum Glass Laminating Machine uses the silicone vacuum bag to make the pre-laminated glass is processing in the vacuum condition.It also possible to laminating EVA Interlayer Film with silk、paper、 calligraphy and painting、ultraviolet radiation unilateralism film、swithchalbe film and so on. All kinds of art glass, decorated glass, privacy glass, safety glass and solar panel can be processed in the EVA Vacuum Glass Laminating Machine. Compared to autoclave producing line for Polyvinyl Butyral PVB Interlayer Film, the EVA Vacuum Glass Laminating Machine is much easier to operate and less cost to build., and more flexible and convenient for the designer.
Working Principle
EVA Vacuum Glass Laminating Machine uses silicone vacuum bag to make the pre-laminated glass is cured under vacuum environment.
Function and Characteristic
Oven in the EVA Vacuum Glass Laminating Machine afford horizontally heating to make the heat in average and reduce the waste of heat.
EVA Vacuum Glass Laminating Machine Vacuum bed is made by high quality silicone vacuum bag, which sustain for more 2500 times heating.
EVA Vacuum Glass Laminating Machine Control panel is precisive, one-set complete processing-easy to operate.
The EVA Vacuum Glass Laminating Machine can produce laminated glass with EVA Film, but also you can laminate other decoration interlayers, like smart glass.
Customization is available. The EVA Vacuum Glass Laminating Machine is concisely designed according to customer’s requirement.
EVA Vacuum Glass Laminating Machine save electricity power: produce one batch(5 floors) in 2-3 hours ,consume only 40 kilowatt per hour.
CNC Glass straight-line edging machine
CNC-E9 General description
CnC-E9 is suitable for processing straight-line edge & 45°arises of glass sheet with various size and thickness.
The main base is made of cast iron.
The glass thicknesses is adjusted by a servomotor and showed on a digital display.
A special design of the in-feed section for controlling the desired amount of glass removal without adjusting each spindle individually.
Independent felt wheel and the cerium water recirculation system make the flat edge more shining.
Input and output conveyor adopt timing belt which can improve the transmission precision.
It is easy to operate and has good performance.
CNC-E9 Model Explanation
9 Spindles totally: 5 spindles for the straight-line edge (adopt the independent wool felt wheel), 2 pieces of spindle for front and back arris each.
CNC-E9 Operation Condition
Power supply :AC380V±10% 3φ 50HZ±2%
Environment :Temperature : 1~40℃
R.H: 90%
CNC-E9 Technical Data
A. Processing glass thickness: 3-25mm
B. Angle of arris: 45°
C. Min.size of glass: 80mm×80mm
D. Processing speed: 0.5~4.5m/min
E. Installed power :19.08KW;
F. Dimension : 7000×1400×2500mm
CNC Glass straight-line double edging machine
CNC2E8 is available in processing glass with thickness 3-12mm, which is produced in 8spindles (4 peripheral wheels per side) rough, fine grinding; polishing can be finished at a time. Adopt PLC for controlling. The CNC2E8 are also suitable for small production batches.
Mainly parameter:
Dimension of the whole machine (L*W*H) (mm):3270*3240*1900
Working table height (mm): 850
The Min. area of processing glass (mm2): 150*150
Processing glass width (mm): 150~1500
Processing glass thickness (mm): 3~19
Processing glass Diagonal error (mm):2m*2m≤1
Processing glass parallelism error (mm) ≤0.5/2m
The speed of transmission of processing glass (M/Min): 0.5-4.5M/Min.
(According to the thickness of glass to adjust)
Power (KW): 21.7
Voltage (V): 380
Frequency (Hz): 50
Air pressure (MPA):0.4-0.8
Weight (Kg):3500
