CNCGLASS-EVA-High-Cut-Off-PID-Resistant-Film-Catalog-2026-11-14

This catalog presents a high cut-off, PID-resistant EVA encapsulant film from CNCGLASS for photovoltaic modules that need a strong ultraviolet cut-off on the backsheet side of the stack. The film is made from ethylene-vinyl acetate copolymer plus the additives required for module encapsulation. It seats and protects the cells, and it is laid toward the backsheet so that ultraviolet light is kept from reaching that sheet.

In the 290–380 nm band, transmittance is no higher than 30%, which limits ultraviolet damage to the backsheet so the sheet ages more slowly. Across the 380–1,100 nm working band, transmittance is at least 91%, so the useful part of the solar spectrum can still pass. After aging, peel strength is specified to remain high enough for outdoor modules to stay free of delamination through 25 years in the field. The film stands up to high temperature, high humidity, and ultraviolet light, is PID-resistant, and is intended to laminate readily with short cycle times.

The film is offered in a thickness range of 0.3–1.0 mm, widths up to 1,400 mm, and roll lengths of 150–350 m. Key published values include crosslinking of at least 75% (about 85% is given as a practical lamination target), tensile strength of at least 18 MPa, elongation of at least 500%, peel strength of at least 60 N/cm to glass and 40 N/cm to the backsheet, volume resistivity of at least 1 × 10¹⁵ Ω·cm, and dielectric breakdown strength of at least 26 kV/mm. UV and damp-heat aging (1,000 h) are both specified at a yellowness-index change of no more than 4.

The catalog also gives starting windows for single-chamber and two-chamber laminators, together with storage and handling notes: keep rolls cool and dry (not above 30 °C or 60% RH), prefer use within three months (up to six months storage), limit stacking to five layers, and use opened or cut film within 48 hours. Pricing, available widths and thicknesses, and packing details are available from CNC@CNCNEXT.COM.

Leave a Reply

Your email address will not be published. Required fields are marked *