This CNCGLASS technical note summarises the salt spray corrosion resistance of architectural laminated glass fabricated with the CNCGLASS ionoplast interlayer, a stiff ionic-type structural interlayer for high-performance laminated glazing. The makeup is 3 mm clear glass + 1.52 mm CNCGLASS ionoplast interlayer + 3 mm clear glass. Five specimens, each 150 mm × 200 mm, were exposed continuously for 3,000 hours in a neutral salt spray environment in accordance with ASTM B117-16, Standard Practice for Operating Salt Spray (Fog) Apparatus. The 3,000-hour exposure duration corresponds to three times the 1,000-hour qualification threshold commonly required of structural glazing interlayers. The document states that it is a CNCGLASS technical note and performance summary, not a third-party test certificate or a certificate of conformity, and that it does not authorise the use of any third-party laboratory mark.
Test conditions were a chamber temperature of 35 °C, a saturated air tank temperature of 47 °C, a 5% NaCl salt solution at pH 6.8, a solution settlement rate of 1.6 mL / 80 cm² / h, and 3,000 hours of continuous exposure, with laboratory ambient conditions of 23 ± 2 °C and 50 ± 5% RH. After 3,000 hours, all five laminated specimens remained sound and passed. Specimens 001#, 002# and 004# showed no whitening, discoloration, blistering or cracking in the laminated portion. Specimens 003# and 005# showed no blistering or cracking in the laminated portion, with salt penetration of about 1 mm confined to the clamped edge area.
No whitening, discoloration, blistering, turbidity or cracking developed in the laminated areas of any specimen. On two specimens, salt penetration was limited to approximately 1 mm at the clamped edge zone — the mechanically gripped boundary region of the panel — with no ingress into the free laminated area. The note concludes that laminated glass made with the CNCGLASS 1.52 mm ionoplast interlayer withstood 3,000 hours of continuous neutral salt spray exposure with no whitening, discoloration, blistering, turbidity or cracking of the laminated portion, and that this performance demonstrates long-term edge stability and moisture resistance under sustained corrosive attack, supporting use in coastal facades, marine glazing, balustrades and exterior structural glass applications.
Contact for this work is Peter Lin at CNC Ucolin Interlayer Technology Co., Ltd. (brand CNCGLASS), SHENZHEN, GD, CHINA, email cnc@cncglass.com.