Advantages of EVA Interlayer Film Compared to PVB Interlayer Film

Advantages of EVA Interlayer Film Compared to PVB Interlayer Film

By Peter Shin www.evafilms.com

EVA Interlayer Film and PVB Interlayer Film are both used to make safety laminated glass. PVB Interlayer Films have been used to make laminated glass far before EVA Interlayer Films have been used to make laminated glass.

Laminated glass is popular used as safety glass to protect people and property.

 

PVB Introduction:

PVB stands for Polyvinyl butyral. It is made of polyvinyl alcohol by reaction with butyraldehyde. The major application is laminated safety glass for architectural building windows and automobile windshields. (learn more go to wiki: http://en.wikipedia.org/wiki/Polyvinyl_butyral ) .

 

What’s Wrong with PVB:

However, PVB Interlayer Film is very sensitive to moisture, which makes it difficult to store and process. It requires high standard of processing condition to care about humidity.

So EVA Interlayer Film is emerging and playing a more and more important roll in laminated glass and decorative art glass world.

 

EVA Introduction:

EVA is the copolymer of ethylene and vinyl acetate. The weight percent vinyl acetate usually varies from 10 to 40%, with the remainder being ethylene. (learn more go to wiki:http://en.wikipedia.org/wiki/Ethylene-Vinyl_Acetate )

 

Architectural EVA(Ethylene-vinyl acetate) Interlayer Film can be used in Vertical Safety Glass, Sloped Safety Glass and Overhead Safety Glass. Architectural EVA Interlayer Film owns high-performance safety function properties, reliable and long-time weather resistance. The standard thickness of Architectural EVA Interlayer Film is 0.38mm and 0.76mm. Architectural EVA Interlayer Film past the safety standard of the safety laminated glass with PVB(Polyvinyl butyral) Interlayer Film in China.

 

 

EVA Interlayer Film has Great Properties

-Great Light Transmission, ≧92%

-Almost Totally UV Blocked, ≧99%

-Long Weather Resistance, ≧15 years

-Great Tensile Strength, ≧21 Mpa

-Good Adhesive Strength, ≧50N /cm

-Qualified Impact Resistance As PVB Does

-Qualified Moisture Resistance As PVB Does

 

ALL RIGHT RESERVED BY:

(Product 1. )Ethylene-Vinyl Acetate EVA Interlayer Film for Safety Laminated Glass

(Product 2.) China Solar EVA Film for Solar Panel Encapsulation

(Product 3.) China Smart Switchable Film for Privacy Glass, Smart Glass

www.evafilms.com / www.cncnext.com

[email protected]/ [email protected] / [email protected] /[email protected]

 

 

Advantage of Making Laminated Glass with EVA Film Compared with PVB Film

1.EVA Interlayer Film is Less Sensitive of Moisture. And EVA Interlayer Film can be processed in an common rood condition.

 

2.EVA Interlayer Film is better at mobility when melted and better for laminating with papers, PET, silk, wire net, fabric.

 

3. EVA Film is good at aging resistance, the aging-resistance can be more than 15years.

 

4.EVA Film is stronger in adhesive with various materials, PMMA, PET,Metals, Plastic etc.

 

5. EVA glass laminating line is easier and less cost to install. PVB glass laminating is mainly working in a big autoclave, it’s not suitable for the company make small quantity creatively designed artistic laminated glass for special requirement of different customers. PVB glass laminating machine is a large investment which would be a barrier for the new company who are interested in laminating glass world.

 

 

 

Can EVA Replace PVB?

Prove 1: In China National Safety Laminated Glass Standard(2009 Edition), the Glass Lamination Ethylene-vinyl acetate EVA Interlayer Film is recognized as a safety interlayer film for safety laminated glass, only if the Glass Lamination Ethylene-vinyl acetate EVA Interlayer Film past the same tests as PVB interlayer film.

 

Prove 2: And Glass Lamination Ethylene-vinyl acetate EVA Interlayer Film can past the tests which are required for laminated glass with PVB interlayer film, like High Temperature Resistance Test, Radiation Resistance Test, Humidity Resistance Test, Ball Impact Peeling Test, Shot-bag Impact Test etc.

ALL RIGHT RESERVED BY:

(Product 1. )Ethylene-Vinyl Acetate EVA Interlayer Film for Safety Laminated Glass

(Product 2.) China Solar EVA Film for Solar Panel Encapsulation

(Product 3.) China Smart Switchable Film for Privacy Glass, Smart Glass

www.evafilms.com / www.cncnext.com

[email protected]/ [email protected] / [email protected] /[email protected]

 

 

Sponsored by:

China Ucolin Glass Lamination Solution Experts:

-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass Laminating

-Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel Encapsulation

([email protected] / www.ucolin.com /[email protected]/[email protected])

 

Attentions for Edging Laminated Glass With EVA Film

Attentions for Edging Laminated Glass With EVA Film
1. Don’t edge the laminated glass until the laminated glass with EVA Film has been cooled for 24 hours. Because if you edging too early may cause the delamination in the edges of EVA laminated glass.

2. It’s better if you can edging the glasses before laminating with EVA Film, then you don’t have to edge the EVA laminated glass after heating.

3. If you laminated with some decorative interlayer inside the glass, and the decorative interlayer is easy to absorb water, then you should edging the glasses before processing laminating with EVA Film. Because if you have to edge after heating, the decorative interlayer may absorb water and lead to the delamination.

4. Please use the gentle  grinding wheel to edge the EVA laminated glass.

All rights reserved by
China Ethylene-vinyl acetate EVA Interlayer Film Manufacturer for Safety Architectural Laminated Glass.
China EVA Film for Smart Glass, Privacy Glass, LED Glass etc.
China Solar EVA Film for Solar Panel Encapsulation.
China Switchable Film for Privacy Glass, Smart Glass.
[[email protected] / www.cncnext.com / [email protected] / [email protected]) ([email protected] / www.evafilms.com ]

How to Avoid Delamination When Edging Laminated Glass

How to Avoid Delamination When Edging Laminated Glass

Problem:

Some laminated glass manufacturers may face the problem: when they edging the laminated glass with Ethylene-vinyl acetate EVA Interlayer Film, the laminated glass delaminate at edges.

How to avoid this problem?

Reasons and Solutions:

1.Do not edging the laminated glass until the laminated glasses have been cooled for 24 hours after pulled out from the EVA GLASS LAMINATING OVEN.

2.When edging, SOME heat will be created in the edges, which will do harm to the EVA FILM adhesion, so please use more water to cool the heat when edging the laminated glass.

3.Please edging slowly and tenderly.

4.If the EVA FILM interlayer you use is not good quality, then the adhesive between the EVA Film and glass surface may be weak, then it’s easy to delaminate when edging.

All rights reserved by:

China (Ethylene-vinyl acetate)EVA Interlayer Film Manufacturer for Safety Laminated Glass, Smart Glass, Privacy Glass, LED Glass, PV Solar Encapsulationetc.

[email protected] / www.cncnext.com

[email protected] / www.evafilms.com

[email protected] / [email protected]

Self-Adhesive Switchable Privacy Film for Making Make Switchable Privacy Glass

Self-Adhesive Switchable Privacy Film for Making Make Switchable Privacy Glass

Self-adensive Film is made of Protect Film,Adhesive Surface, ITO Film, Liquid Crystal & Polymer. It works same resemblance performances as the Privacy Glass made in laminating way with NON-Adhesive Switchable PDLC FILM. Its very convenient and flexible to install the SELF-ADHESIVE Switchable Privacy Film on the ALREADY installed windows.

SELF-ADHESIVE SWITCHALBE PRIVACY FILM Performance Parameters

+Switch on :Transparent

+Switch off: opaque

+Dimmer: transparent – opaque ( AC 0~110 V)

+Power Consumption: SELF-ADHESIVE SWITCHALBE PRIVACY FILM has power consumption about 6~7W/m2

+SELF-ADHESIVE SWITCHALBE PRIVACY FILM which is transparent or opaque, excludes 99% outside UV

Solar Ethylene-vinyl acetate EVA Interlayer Film for PV solar panel encapsulation

Solar Ethylene-vinyl acetate EVA Interlayer Film for PV solar panel encapsulation

Main Characteristics of Soalr EVA Film

1. Light Transmittance: ≥ 91%

2. Water Absorption (20℃, 24h): ≤0.1%

3. Gel Content: ≥85%

4. Peeling strength (N/cm): EVA/Glass: ≥50 N/cm;EVA/TPT: ≥30 N/cm;

5. Ultraviolet Aging Resistance (1000h, 83℃,

1000W Ultraviolet Lamp):△YI ≤ 2

6. Heat Aging Resistance (1000h, 85℃): △YI ≤ 2

7. Damp-Heat Aging Resistance (1000h, 85% Relative Humidity, 85℃): △YI ≤ 2

The above mentioned characteristics have been tested by national authorizd institutions and our company labolotory

EVA sheet specification

Thickness: 0.3mm-1.0mm, common use thickness: 0.5mm.

Width: 810mm–2200mm.

China Ethylene-vinyl acetate EVA Interlayer Film Manufacturer for Safety Architectural Laminated Glass.

China EVA Film for Smart Glass, Privacy Glass, LED Glass etc.

China Solar EVA Film for Solar Panel Encapsulation.

China Switchable Film for Privacy Glass, Smart Glass.

[[email protected] / www.cncnext.com / [email protected] / [email protected]) ([email protected] / www.evafilms.com ]